Suncenter LPG CNG Natural Gas Screw Compressor
SUNCENTER-the globally professional manufacturer of high pressure air compressors, gas compressors, medium and high pressure compressors,high pressure piston/reciprocating compressors, output pressure from 300PSI(2MPa) upto 7250PSI(50MPa),compress air/agron/helium/nitrogen/Natural gas and so on,has been widely used in high pressure testing,hydropower station,military,seismic and oil/gas petroleum industry.
Pressure test with gas
Gas transfer and filling
Charging of gas cylinder and accumulator with nitrogen
Supply for isolating gas systems
Gas assisted injection molding
Transfer of oxygen cylinders
Charging of breathing air bottles
Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components
Natural Gas Compressor
Suncenter Natural Gas Compressors are very cost-effective for handling high volumes of gas in gas gathering, vapor recovery, and other applications. Natural Gas compressors are ideal in large volume/low suction pressure applications and to upgrade existing reciprocating compressor installations. Since they operate with few moving parts, low maintenance and high reliability are inherent in rotary screws.
•Skid with Market Proven US made Gas Ends.
•Versatrol Internal Bypass Valves(Option)
•Wide Range of Capacity Control,Fully Automatically.
•All Climate Design, Even For Tough Environment.
•Full-automatic control can realize the system running without anyone on duty.
•Adjustable Vi matches the internal compression to the application requirement for maximum compression efficiency.
•6000V/10000V Explosion-proof Motor upon request.
Air/Nitrogen gas compressors
Suncenter air/nitrogen gas compressor with reliable compression bare blocks, modular design, various blocks, and cylinders are optional; reasonable matching of compression stages and cylinder sizes according to compression ratio, ensuring each stage to be with low-pressure ratio and low operating temperature.
•Working pressure from 2 to 50MPa
•Complete suction protection for real-time monitoring of intake pressure, discharge pressure and temperature
•Advanced pressure-bearing crankcase and condensate drain collection system for zero blow-by of the unit
•Fully automatic PLC control system for unattended operation of the unit
•A variety of driving methods, whether it is a motor drive or diesel drive, both can ensure efficient operation of the unit
•Different discharge filter systems and dry systems are available to meet different purity and dryness requirements.
•Time-tested professional design, simple installation, no require an additional foundation.
High-performance compressor system for rare gaseous gases, compressing, purifying, storing, distributing and recovering.
Suncenter compressors are specially designed for the rare gas. The crankcase resists 2.5bar, prevent gas losses, and special blowby recovery system is standard equipped. Low compress ratio and big size outlet of each stage are designed to reach low interstage temperature, and big capacity cooler is equipped for high compress heat of rare gas.
•Air-cooled or Water-cooled cooler design, meet a variety of application requirements
•Diesel Engine drove upon request
•Full Range Products for various demands
•The time-tested professional design.
The universal modular design brings more flexibility and simplicity for the adjustment of the piston, cylinder, cylinder head and valves with so that we can provide customers with the most efficient and economical system. Our design features and advantages determine our unit CZPT to withstand the test of time and get the user’s approval.
•Easy to install and maintain
•Low maintenance and operating costs
•No special foundation requirements
•Pressurized crankcase to reduce the gas leakage
•Dynamic balance design
•Low compression ratio and temperatures rise
•Suitable for continuous or intermittent operating conditions
•Low speed in order to extend the service life
How to Select Suncenter Gas compressors?
In order to choose a suitable model for you, please kindly reply to us the following questions:
1. What is your present gas pressure? ( )bar
2. What is the gas do you need to compress? Air, natural gas or nitrogen gas or other gases?
3. What is the max outlet gas pressure do you need? ( )bar
4. What is the outlet gas flow rate do you need? ( )Nm3/min
If you are interested in any of our products, please feel free to contact us.
We could also make customized products according to your special requirements.
Why choose Suncenter:
-1. 15 years of manufacturing experience history.
-2. faster lead time, the fastest delivery is about 10-15 working days.
-3. CE & SGS certificate approval factory.
-4. Quality control for every step while production.
-5. Professional engineers have working experience in Maximator.
HangZhou Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in HangZhou city of ZheJiang province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of high pressure booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.
Our main products including:
High Pressure Booster Pumps ( Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster System,Gas compressors,Hydro test bench,
Chemical injection system,CO2/FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine, Valve test bench,Impulse Testing Machine, etc.)
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
13 months’ free warranty since the purchasing date and free technical support during lifetime
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.