China Refrigeration Unit Industrial Cold Room Condensing Unit

Product Description

Product Name:
Refrigeration unit

Product Description:
Conventional Semi-hermetic refrigeration compressor which is used in some cold room, like vegetable /fruit /meat/sea food cold room. The horse power is start from 2hpto 50hp. And the cooling capacity is different because of different horse power. The high point of our compressor is high cooling capacity with short time, low noise.,and good after sales service. I believe it is your best choice.

Technical specifications:
We are a manufacturer, we can customize products for you according to your requirements.If you don’t know which model is suitable for you, you could send message to us.We have several professional engineers to make a customized solution for you.

Open Type CZPT Medium And High Temperature Air-Cooled Condensing Unit  
Model of units RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ-
003H 004H 005H 006H 007H 571H 012H 015H 571H
Compressor model 2DES-3 2CES-4 4FES-5 4FES-6 4DES-7 4VES-10 4TES-12 4PES-15 4NES-20
Applicable Temperature(ºC) -5 ºC ~ -15 ºC
Refrigerant R404
Condenser Quantity of Fan(pcs) 2 2 2 4 4 4 4 4 4
Power of Fan (w) 2*190 2*190 2*190 4*135 4*190 4*190 4*190 4*250 4*420
Ref.Capacity Evaporating Ref. 8300 15710 11110 13960 16890 21300 25800 29400 35200
 of  Temperature Capacity (w)
condensing units -5ºC Power (w) 3310 4070 4380 5540 6620 8571 9860 11170 13320
  Evaporating Ref. 5520 6870 7370 9210 11190 13730 6780 18830 22900
  Temperature Capacity (w)
  -15ºC Power (w) 2780 3440 3760 4700 5690 6580 8130 9090 11000
Coupling Tube coupling 12 12 12 16 16 16 16 16 22
Suction coupling 22 22 22 28 28 28 35 42 42
Overall  Lenght (A) mm 1000 1000 1571 1170 1170 1170 1200 1340 1560
dimension Width(B) mm 820 820 820 900 900 900 900 900 900
  Height (H) mm 590 590 690 1571 1120 1120 1320 1320 1420
Installation dimension(D*E)mm 644*786 644*786 644*786 800*860 800*860 800*860 830*860 990*860 1170*860

Open Type CZPT Medium And low Temperature Air-Cooled Condensing Unit    
Model of units RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ- RX-BZ-
003L 004L 005L 007L 009L 012L 014L 018L 571L
Compressor model 4FES-3 4EES-4 4DES-5 4VES-7 4TES-9 4PES-12 4NES-14 4HES-18 4GE-23
Applicable Temperature(ºC) -20ºC ~ -35ºC
Refrigerant R404A
Condenser Quantity of Fan(pcs) 2 2 2 2 4 4 4 4 4
Power of Fan (w) 2*135 2*190 2*190 2*190 4*135 4*190 4*190 4*190 4*250
Ref.Capacity Evaporating Ref. 4640 5890 7030 8240 15710 11320 13950 19880 23400
 of  Temperature Capacity (w)
condensing units -25ºC Power (w) 3060 3840 4550 5080 6350 6880 8580 12000 14270
  Evaporating Ref. 3590 4540 5420 6140 7760 8410 10520 15320 15320
  Temperature Capacity (w)
  -30ºC Power (w) 2660 3320 3940 4260 5380 5740 7240 1 0571 1 0571
Coupling Tube coupling 12 12 12 16 16 16 16 16 22
Suction coupling 22 28 28 28 35 35 35 42 54
Overall  Lenght (A) mm 940 1000 1000 1571 1170 1170 1170 1200 1340
dimension Width(B) mm 820 820 820 820 900 900 900 900 900
  Height (H) mm 540 590 590 690 1571 1120 1120 1320 1420
Installation dimension(D*E)mm 590*786 644*786 644*786 644*786 800*860 800*860 800/860 830*860 950*860

Application:
Cold Room

Exhibition

FAQ:
Q1. When can I get the price ?
A1: We usually offer the quotation within 1-2 work days after receiving your detailed inquiry.
Please provide detailed requirements like the capacity, freezing product, product size, inlet &outlet temperatures, refrigerant and other special requirements if any.
Q2. What is the Trade Term?
A2: We accept Ex-work factory , FOB ZheJiang .
Q3. How long is the production time?
A3: 60days after receiving down payment or Letter of credit.
Q4 .What is the Payment term?
A4: By 100% T/T before shipment or By L/C at sight.
Q5. What are your terms of packing?
A5: Packing: export worthy package suitable for container transportation.
Q6. Do you test all your goods before delivery?
A6: Yes, we have 100% test before delivery.
Q7: Where is your factory located?
A7: Our factory is located in HangZhou, ZheJiang province.
Q8: What is your warranty?
A8: Warranty: 12months after commercial running.
Q9: Can we do our OEM logo?
A9: Yes, for the products with drawing supplied by you, we of course apply your logo

Company infomation:

HangZhou CZPT Refrigeration Equipment Co., Ltd. is a joint-stock private enterprise located in HangZhou Industrial Park of Xingdong Country, HangZhou City, ZheJiang Province. Our factory is adjacent to ZheJiang with convenient transportation. Welcome to visit the factory!
     BX-freezing has passed ISO9001 quality management system, EU CE certification and GC2 qualification for special pressure pipeline construction. Our factory has independent import and export right. We are HangZhou Refrigeration Equipment Technology Engineering Center and National High-tech Enterprise. We are the school-enterprise cooperation base of HangZhou University, dedicated to talent cultivation and technological innovation. We have obtained about 50 invention and utility model patents in the field of refrigeration equipment.
We have a group of professional and experienced engineers engaged in the design and production of quick-freezing machinery for more than 10 years. We provide overall solutions for food processing production lines. We focus on the design, development, production, sales and maintenance of various series of quick-freezing equipment and food deep-processing equipment. Our products are widely used in food processing enterprises such as seafood, poultry, meat, baking, ice cream, pasta, fruit and vegetable processing, and other processing food.
     BX-freezing quick freezing equipment strives to provide professional complete equipment solutions for domestic and foreign customers. The main products are as follows:
1. Spiral freezer
2. Tunnel freezer
3. Fluidized freezer
4. Cold room
5. IQF line freezer
6. Refrigeration Unit
7. Other food processing equipment
HangZhou CZPT Refrigeration Equipment Co., Ltd. is a fast growing professional manufacturer of quick-freezing equipment. The complete products, leading technology, reasonable design, reliable quality and excellent after-sales service have been well received by many users. There are already More than 2,000 BX-freezing Series units delivered worldwide. BX-freezing Team are dedicated to provide you with professional solutions, mature products.

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Refrigeration Unit Industrial Cold Room Condensing Unit  China Refrigeration Unit Industrial Cold Room Condensing Unit

Tags

Recent Posts