China Energy Saving 22kw/30HP Industrial Fix Speed Rotary Air Compressor & Screw Air Compressor at-30A manufacturer

Item Description

Solution Description:

The screw air compressor is composed of a pair of parallel and intermeshing feminine and male screws. It is the most widely used rotary compressor.
There are 2 sorts of single-screw and twin-screw. Usually speaking, the CZPT refers to the twin-screw compressor. It was initial proposed by the German H. Krigar in 1878. It was not right up until 1934 by A. Lysholm of the Royal Institute of Technologies in Sweden that the technology was established, and it began to be used in business and attained speedy growth.

Item Image:

Merchandise Specification:
 

Product AT-10A AT-15A AT-20A AT-25A AT-30A AT-40A AT-50A AT-60A
Air Shipping (m3/min)/ Pressur(Mpa) 1.2/.7 one.sixty five/.7 two.5/.seven 3.2/.7 three.8/.seven 5.3/.seven six.8/.7 7.4/.seven
1.1/.eight 1.5/.8 two.3/.8 three./.eight three.6/.8 five./.8 six.2/.8 seven./8
.95/1. 1.3/1. 2.1/1. two.7/1. three.2/1. 4.5/1. 5.6/1. six.2/1.
.8/1.two one.1/1.2 1.9/1.two 2.4/1.2 2.7/1.two four./1.two five./1.2 5.6/1.2
Cooling Strategy Air Cooling
Lubrication Quantity(L) ten 18 25 30
Driving Manner Direct Driven
Voltage 220-440V50/60Hz
Electricity(KW/HP) 7.5/ten 11/fifteen 15/twenty 18.5/twenty five 22/thirty thirty/40 37/50 forty five/60
Start off Method Variable Frequency Commencing
Dimensions(cm) 86*63*86 106*75*101 121*85*116 136*a hundred and one*126
Weight 150 230 250 300 350 450 480 550
Outlet dimension 1/2″ 3/4″ 1″ 1&1/2″

Product Parameters:

Product Details:

New technology of higher-effective Airend
one.Sophisticated and energy conserving spiral tooth-variety technology.
2.New Type 5:6 asymmetrical rotator tooth kind.
3.Electrical power increased by a lot more than 5%-10% in air dischage when in comparison to other common machine.

High -efficient electricity system
one.PM motor adopts substantial-efficiency NdFeB, which will not drop magnetism under 200ºC and its service daily life reaches as prolonged as 15 several years.
two.Coaxial construction design,generate efficiency of bearingless composition is 100%.
3.No normal grease injection, no replacement of bearings on a normal basis.
4.The motor is small in size, reduced sound,lower in vibratio and sleek in operation.

High-Overall performance Inverter
1.Outfitted with substantial frequency reactor, lowering the frequency converter.
2.Lowers CZPT recent when it is commenced, realizes steady commencing.
3.Can be immediately change the speed of the Motor accoring to your genuine requirement, Power conserving up to 35%.

High Successful oil and gas speraration method
with the globe renowned brand apoda oil and fuel sperarator, lessen the oil content material of the compressor exhaust gasoline and the oil content of the unit electrical power intake is only 1-2PPM.

Smart manage system
1.Multi-Language can be switched in accordance to your requirement.
2.With defense functions up to twelve types, these kinds of as overload,short circuit,minimal temperature, above voltage and so on.
3.Just and very clear, easy to operate.

Solution Installation Diagram:

Product Software:
Workshop Screen:

Our Advantages:

Factory Overview:

Global Market:

FAQ:

one.Q:Can you give the samples to us?
    A: of course, we can offer the sample to you in totally free, but the expense of the freight on your account.

2. Q:Can you do the purchase in accordance to the customer prerequisite?
     A:Of course, we can do the order according to your sample or drawings, OEM/ODM service provided.

3. Q:What is your delivery time?
    A:Generally, it truly is 7 days if the items are in stock. It will  takes about 15-25days if the goods are not in inventory, Mostly relies upon on the purchase quantity.

four.Q:What is your phrases of payment?
    A:Normally 30% worth of items as deposit, balance amount towards the duplicate of the BL.

5. Q: How lengthy is the warranty ?
     A: fourteen months considering that the container delivered besides fast-dress in parts.

 


/ Set
|
1 Set

(Min. Order)

###

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 2200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model AT-10A AT-15A AT-20A AT-25A AT-30A AT-40A AT-50A AT-60A
Air Delivery (m3/min)/ Pressur(Mpa) 1.2/0.7 1.65/0.7 2.5/0.7 3.2/0.7 3.8/0.7 5.3/0.7 6.8/0.7 7.4/0.7
1.1/0.8 1.5/0.8 2.3/0.8 3.0/0.8 3.6/0.8 5.0/0.8 6.2/0.8 7.0/8
0.95/1.0 1.3/1.0 2.1/1.0 2.7/1.0 3.2/1.0 4.5/1.0 5.6/1.0 6.2/1.0
0.8/1.2 1.1/1.2 1.9/1.2 2.4/1.2 2.7/1.2 4.0/1.2 5.0/1.2 5.6/1.2
Cooling Method Air Cooling
Lubrication Volume(L) 10 18 25 30
Driving Mode Direct Driven
Voltage 220-440V;50/60Hz
Power(KW/HP) 7.5/10 11/15 15/20 18.5/25 22/30 30/40 37/50 45/60
Start System Variable Frequency Starting
Size(cm) 86*63*86 106*75*101 121*85*116 136*101*126
Weight 150 230 250 300 350 450 480 550
Outlet size 1/2" 3/4" 1" 1&1/2"

/ Set
|
1 Set

(Min. Order)

###

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 2200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model AT-10A AT-15A AT-20A AT-25A AT-30A AT-40A AT-50A AT-60A
Air Delivery (m3/min)/ Pressur(Mpa) 1.2/0.7 1.65/0.7 2.5/0.7 3.2/0.7 3.8/0.7 5.3/0.7 6.8/0.7 7.4/0.7
1.1/0.8 1.5/0.8 2.3/0.8 3.0/0.8 3.6/0.8 5.0/0.8 6.2/0.8 7.0/8
0.95/1.0 1.3/1.0 2.1/1.0 2.7/1.0 3.2/1.0 4.5/1.0 5.6/1.0 6.2/1.0
0.8/1.2 1.1/1.2 1.9/1.2 2.4/1.2 2.7/1.2 4.0/1.2 5.0/1.2 5.6/1.2
Cooling Method Air Cooling
Lubrication Volume(L) 10 18 25 30
Driving Mode Direct Driven
Voltage 220-440V;50/60Hz
Power(KW/HP) 7.5/10 11/15 15/20 18.5/25 22/30 30/40 37/50 45/60
Start System Variable Frequency Starting
Size(cm) 86*63*86 106*75*101 121*85*116 136*101*126
Weight 150 230 250 300 350 450 480 550
Outlet size 1/2" 3/4" 1" 1&1/2"

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Energy Saving 22kw/30HP Industrial Fix Speed Rotary Air Compressor & Screw Air Compressor at-30A     manufacturer China Energy Saving 22kw/30HP Industrial Fix Speed Rotary Air Compressor & Screw Air Compressor at-30A     manufacturer
editor by CX 2023-03-28

Recent Posts