Product Description
Why Ventilation System
Different types of particulate matter and gases are mixed in outdoor air. FIne and coarse particulate matter(PM2.5 and PM10) from wood-burning, exhaust fumes, asphalt and car tyres. In addition there is nitrogen dioxide(NO2) from cars, which ozone(O3) is produced in the air from components from different sources. In combination, or by themselves, pollutants can trigger CZPT problems among children and vulnerable individuals, particularly in winter. Illustration: Norwegion Institute of Public Health.
Product Description
Our products offer fresh air ventilation system for CZPT and clean air condition for indoor living. With ERV section core, reducing the consumption of energy, help a better living environment.
How to choose Ventilator
* Airflow calculation
I. Fresh airflow standard: 30CMH/Person (No smoking condition indoor)
Airflow= Number of people * 30 CMH
II. According to the size of room and fresh air change rate
Airflow= Room area * Room Height * Fresh air change rate (CMH)
Function for option
Energy recovery ventilation (ERV) is the energy recovery process of exchanging the energy contained in normally exhausted building or space air and using it to treat (precondition) the incoming outdoor ventilation air in residential and commercial HVAC systems. During the warmer seasons, the system pre-cools and dehumidifies while humidifying and pre-heating in the cooler seasons. The benefit of using energy recovery is the ability to meet the ASHRAE ventilation& energy standards, while improving indoor air quality.
PM2.5 detector
CO2 detector
Humidity detector
TVOC detector
Working principle:
The flat plates and the corrugated plates form channels for suction or exhaust air stream. the energy is recovered when the 2 air steams passing through the exchanger crossly with temperature difference
Three optional purification methods are available, and can be arbitrarily matched.
A:Primary purification:
The primary filter is suitable for the primary filtration of ventilation system, mainly used for filtering dust particles above.
5μm; the primary filter can be reused after washing.
B:TVOC purification:
TVOC filter is made of activated carbon, is used to deal with odor and pollution in the air, with 100% surface adsorption
capacity, can effectively remove a lot of odor and harmful gases.
C: High efficiency purification
Effectively purify PM2.5 Particulate, for 0.1 CZPT and 0.3 CZPT particles, the purification efficiency reaches 99.998%. It
traps 99.9% of bacteria and viruses and causes them to die from dehydration within 72 hours.
Detailed Photos
| Model | Voltage | Rared Power (W) |
Static Pressure(Pa) | Airflow (CMH) |
Remove Rate | Filter | Weight (Kg) |
Noise dB(A) |
Dimension | Tuyere size (mm) |
| OX-XF-150P-C OX-XF-150P-X |
220V | 100 | 85 | 150 | >95% | H13 | 29 | 33 | 700*600*210 | 120 |
| OX-XF-250P-C OX-XF-250P-X |
220V | 120 | 110 | 250 | >95% | H13 | 29 | 38 | 700*600*210 | 120 |
| OX-XF-350P-C OX-XF-350P-X |
220V | 180 | 120 | 350 | >95% | H13 | 31 | 38 | 700*600*210 | 120 |
| OX-XF-500P-C OX-XF-500P-X |
220V | 360 | 130 | 500 | >95% | H13 | 35 | 38 | 850*700*230 | 150 |
Packaging & Shipping
Standard exporting carton with wooden box packing.
Installation Instructions
Installation place choose
Keep from the rest area (avoid the working noise)
Prevent the exposure to sun and rain drops
Reasonable ducts layou
FAQ
A) How could I get a sample?
We do not provide free sample, if you are interested in our products, please contact our customer service, she can tell you the details of the sample.
B) Sample time?
Existing products: Within 15 days;
C) Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
D) Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our MOQ.
E) How to guarantee the quality of your products?
1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
