China Air Blast Condensing Unit Cooler Unit Freezers Refrigeration Equipment Cold Room Negative AC Compressor Condanser small air compressor

Product Description

Item Description

Item  Explanation
Low-temperature quick-freezing is the essential to prolonged-time period substantial-quality preservation of foods. Speedy cooling can make food rapidly go via the ice crystal development zone, stop the formation of huge ice crystals in food cells, keep away from hurt to the mobile wall, and perfectly maintain the first high quality and style of the foodstuff. The temperature of the fast-freezer is generally -fifteen ° C ~ -35° C. It is mainly utilized for lower temperature and quick freezing of foods, drugs, medicine, and other objects. Cooling down rapidly and the preservation influence is great.

We need to know this info! 

1: What is the dimension of chilly area: Length×Width×Height by Meter

2: What variety of merchandise will load within? What is actually the indoor temperature?

three: What’s the market voltage?

Thorough Photographs

Solution Parameters

one. Cold Room Panels For Chilly Place
Excellent watertight performance Polyurethane cold storage board with dampness and drinking water resistance. The rigid polyurethane has a shut-mobile ratio of more than 90% and is a hydrophobic content. It does not increase the thermal conductivity thanks to humidity absorption, and the wall surface will also seep.
Very good sound insulation The porosity of the polyurethane material is steady and fundamentally shut-cell composition, which not only has superb warmth preservation performance but also has resistance to freezing and thawing and sound absorption.
Robust resistance to deformation Strong resistance to deformation, not effortless to crack, steady and secure end.
Hearth retardant and high-temperature resistant Polyurethane is a flame-retardant self-extinguishing material right after including flame retardant. Its softening position can achieve earlier mentioned 250 °C, and it will only decompose at increased temperatures.
 

Product Title

PU sandwich panel

Surface area Material

shade metal(PPGI), stainless steel, aluminum

Main content

Polyurethane foam

PU density

45±2KG/m3

Fire quality

B2

Width

normal width 1000mm, greatest 1050mm

Duration

Customized, optimum 11980mm

Thickness

fifty/seventy five/one hundred/150/200mm

 

Panels thickness (mm)

Temperature gap among inside-external surroundings

Peak of wall panel (max)

Roof duration (max)

mm

ºC

m

m

fifty

30

three.5

two.four

75

forty

4.5

three.8

one hundred

50

five

4.5

one hundred twenty

60

5.5

6

one hundred fifty

70

six

6.five

two hundred

90

seven

seven.six

If there is a force hole between the inner-external atmosphere without wind load, more than-duration or wind-load need to established metal wall beam.

Guidelines: the knowledge above is figured out according to 8-10 W / heat flux.


2. Condensing Device For Chilly Room

Unit Cold Place Condensing Condenser Unit Evaporator Gear For Chilly Area
Yangchuan Condensing device is the optimized blend of performance, trustworthiness, simple set up, and audio performance. It is optimized created and made to minimize installation and upkeep costs, a lot more effective although producing your generation even much more successful and significantly less noise affect for the community.

3. Evaporators For Cold Room

Dimension

Size(m)×Width(m)×Height(m) / FT

Refrigeration device/Condsenor device

Well-known Manufacturer and so forth

Refrigeration variety/Air cooler/Evaporator

Air-cooled/h2o-cooled/evaporation cooled

Refrigeration

R22,R404A,R407C,R507a Refrigerant

Defrost Variety

Electric defrosting

Voltage

220V/50Hz,220V/60Hz,380V/50Hz,380V/60Hz,440V/60Hz optional

PU Panel

New substance polyurethane insulation panel,45 kg/m³

Panel thickness

50mm,75mm,100mm,150mm,200mm

Sort of doorway

Hanged doorway, sliding doorway,double swing electrical sliding doorway,truck doorway

Temp of space

-60°C~+20°C optional/Customization

Fittings

All necessary fittings are provided,optional

Location to assemble

Indoor/out door(concrete construction constructing/metal building bullding

Certifications

 

Set up Instructions

Firm Profile

Our Positive aspects

Initiatives for ref

FAQ
1.Can you personalize the chilly storage room dimension and temperature ?
Indeed, we can customise the cold room dimension and temperature in accordance to your requirements.
Any dimension will do, if you have no concept, you should notify me the complete amount of your cargo, our engineer can design it for you.

2.Can you offer refrigeration products?
Sure, we can offer a panel insulation program and an equipment refrigeration program.

3.What brand name compressor can you offer you?
Generally with first Bizter and Copeland compressor. Well-known in the world.

four.How about the shipping and delivery time?
For panels, our shipping time is close to 7~15 times. For tools, our delivery time is around twenty five workdays. 
Time will be shorter is you are in a hurry.


/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 3 Year
Temperature: -40ºC to 15ºC
Refrigerant: Freon
Size: Large
Structure: Assembled
Use Nature: Production

###

Customization:
Available

|


###

1: What’s the dimension of cold room: Length×Width×Height by Meter
2: What kind of goods will load inside? What’s the indoor temperature?
3: What’s the industry voltage?

###

Product Name
PU sandwich panel
Surface Material
color steel(PPGI), stainless steel, aluminum
Core material
Polyurethane foam
PU density
45±2KG/m3
Fire grade
B2
Width
standard width 1000mm, maximum 1050mm
Length
Customized, maximum 11980mm
Thickness
50/75/100/150/200mm

###

Panels thickness (mm)
Temperature gap between internal-external environment
Height of wall panel (max)
Roof length (max)
mm
ºC
m
m
50
30
3.5
2.4
75
40
4.5
3.8
100
50
5
4.5
120
60
5.5
6
150
70
6
6.5
200
90
7
7.6
If there is a pressure gap between the internal-external environment without wind load, over-length or wind-load need to set steel wall beam.
Tips: the data above is figured out according to 8-10 W / heat flux.

###

Dimension
Length(m)×Width(m)×Height(m) / FT
Refrigeration unit/Condsenor unit
Famous Brand etc
Refrigeration type/Air cooler/Evaporator
Air-cooled/water-cooled/evaporation cooled
Refrigeration
R22,R404A,R407C,R507a Refrigerant
Defrost Type
Electric defrosting
Voltage
220V/50Hz,220V/60Hz,380V/50Hz,380V/60Hz,440V/60Hz optional
PU Panel
New material polyurethane insulation panel,45 kg/m³
Panel thickness
50mm,75mm,100mm,150mm,200mm
Type of door
Hanged door, sliding door,double swing electric sliding door,truck door
Temp of room
-60°C~+20°C optional/Customization
Fittings
All necessary fittings are included,optional
Place to assemble
Indoor/out door(concrete construction building/steel construction bullding

/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 3 Year
Temperature: -40ºC to 15ºC
Refrigerant: Freon
Size: Large
Structure: Assembled
Use Nature: Production

###

Customization:
Available

|


###

1: What’s the dimension of cold room: Length×Width×Height by Meter
2: What kind of goods will load inside? What’s the indoor temperature?
3: What’s the industry voltage?

###

Product Name
PU sandwich panel
Surface Material
color steel(PPGI), stainless steel, aluminum
Core material
Polyurethane foam
PU density
45±2KG/m3
Fire grade
B2
Width
standard width 1000mm, maximum 1050mm
Length
Customized, maximum 11980mm
Thickness
50/75/100/150/200mm

###

Panels thickness (mm)
Temperature gap between internal-external environment
Height of wall panel (max)
Roof length (max)
mm
ºC
m
m
50
30
3.5
2.4
75
40
4.5
3.8
100
50
5
4.5
120
60
5.5
6
150
70
6
6.5
200
90
7
7.6
If there is a pressure gap between the internal-external environment without wind load, over-length or wind-load need to set steel wall beam.
Tips: the data above is figured out according to 8-10 W / heat flux.

###

Dimension
Length(m)×Width(m)×Height(m) / FT
Refrigeration unit/Condsenor unit
Famous Brand etc
Refrigeration type/Air cooler/Evaporator
Air-cooled/water-cooled/evaporation cooled
Refrigeration
R22,R404A,R407C,R507a Refrigerant
Defrost Type
Electric defrosting
Voltage
220V/50Hz,220V/60Hz,380V/50Hz,380V/60Hz,440V/60Hz optional
PU Panel
New material polyurethane insulation panel,45 kg/m³
Panel thickness
50mm,75mm,100mm,150mm,200mm
Type of door
Hanged door, sliding door,double swing electric sliding door,truck door
Temp of room
-60°C~+20°C optional/Customization
Fittings
All necessary fittings are included,optional
Place to assemble
Indoor/out door(concrete construction building/steel construction bullding

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Air Blast Condensing Unit Cooler Unit Freezers Refrigeration Equipment Cold Room Negative AC Compressor Condanser     small air compressor China Air Blast Condensing Unit Cooler Unit Freezers Refrigeration Equipment Cold Room Negative AC Compressor Condanser     small air compressor
editor by CX 2023-03-30

Recent Posts