China 7.5kw 10HP Combined Screw Air Compressor Assembled 1.2m3/Min Refrigerator Air Dryer

Product Description

Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving

 
KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer 
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar

7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
Superior components, low maintenance cost
Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
IP54/IP55 high quality motor, SK F bearing, Class F level insulation; Class BTemperature rise; 
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
Top door is locking design, easy to open to clean the cooler and fan 
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
Phase reversal protection, current overload protection, pressure protection, overheat protection

 

 Technical Parameters of LB-TY Fixed Belt Drive Screw Compressor
Model No. Motor Power (kw) Horse Power
(Hp)
Air delivery(m³/mim)  Working pressure(bar) Air Dryer Model Air Tank
(L)
L*W*H(mm) N.W(KG)
LB-4TY 4 5.5 0.74 7 HAD-001-1NF
(1.0m3/min)
250L 1400*670*1550 400
0.66 8
0.56 10
LB-5.5TY 5.5 7.5 0.8 7 HAD-001-1NF
(1.0m3/min)
250L 1400*670*1550 450
0.7 8
0.6 10
LB-7.5TY 7.5 10 1.2 7 HAD-001NF
(1.6m3/min)
250L 1400*670*1550 500
1.1 8
1 10
0.8 13
LB-11TY 11 15 2.0 7 HAD-003NF
(2.7m3/min)
300L 1400*670*1550 550
1.6 8
1.42 10
1.14 13
LB-15TY 15 20 2.5 7 HAD-003NF
(2.7m3/min)
300L 1150*800*1100 390
2.3 8
2 10
1.75 13
LB-18.5TY 18.5 25 3.1 7 HAD-003NF
(3.8m3/min)
250L*2 1650*800*1840 620
2.9 8
2.6 10
2.2 13
LB-22TY 22 30 3.5 7 HAD-003NF
(3.8m3/min)
250L*2 1650*800*1840 700
3.3 8
3.0 10
2.6 13
*According to the standard of GB19153-2009     *Compressor Stage: Single Stage Compression
*Standard Power Supply: 380V/50Hz/3ph           *Exhaust Temperature: Ambient Temperature +15ºC
*Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC;
*Please contact us for any specification that is not within the above mentioned standard.
Welcome to join us !
We Consider Our Customers as Our Friends and Families, and We do Believe in the CZPT Situation for Building up Long-Term Relationship. 
• Innovation
    Provide innovative, stable products and services.
• Quality
    Deliver consistently superior performance and pursue every possible improvement. 
• Agility
    Identify emerging trends and act quickly to acquire new opportunities.
• Customer Satisfaction
    Anticipate customer needs and exceed their expectations.
• Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.

Name   7.5KW Belt Driven Integrated Screw Air Compressor
Model   SLB-7.5-7 SLB-7.5-8 SLB-7.5-10 SLB-7.5-13
Specification Working pressure bar 7bar 8bar 10bar 13bar
Air delivery M³/min 1.15m3/min 1.06m3/min 0.85m3/min 0.65m3/min
Motor power KW 7.5KW
Voltage V 380V/50Hz/3ph
(other voltage need to take 20days customize produciton )
Outlet dia   G3/4
Weight Kg 280
Dimension (L*W*H)mm 1650*800*1700mm  (Integrated compressor+dryer+tank) 
Compressor type Single Stage Screw
Start mode   Delta Start
Cool method   Air cooled
Driven method   belt driven
Discharge temp ºC Ambient temp+10-15ºC
Compressed oil content ppm ≤3PPM
Noise dB(A) 78
Motor Protection grade (IP54) IP54 / Class F insulation/ Class B temperature rise
Max ambient temp ºC ≤40ºC
Control mode  PLC MAM PLC
Lubricant Oil replace regular time H 3000hrs(First runing time only 500hrs)
Oil separator replace regular time H 3000hrs 
Oil Filter replace regular time H 3000hrs(First runing time only 500hrs)
Air filter element replace regular time H 3000hrs(First runing time only 500hrs)
Configured Refrigerated Air Dryer Specification  m3/min 1.2m3/min
Voltage 220V/50Hz/1ph
Configured Air Tank Volume L 300L (GB-150 standard pressure vessel)

               

KEEPWIN TECHNOLOGY ZheJiang CO.,LTD is a high-tech joint-stock enterprise which specializes in the development and designing, manufacturing and installation, mating remolding, and sales service of compressors as well as the corresponding pre-and post-position purifying equipment. CZPT offers you a various range of gas compressors like normal standard screw compressor, piston compressor, diaphragm compressor, CNG compressor, CO2 compressor, Hydrogen compressor, Nitrogen booster compressor, etc. for your process handling needs. These products are developed with the highest level of professionalism and innovation. The premium-grade raw material and advanced technology is utilized in the production process, which assists us in giving required shape, design, and finish to the finished products. The products are then sent to the Quality Control Department for stringent quality tests on various parameters.
Keepwin Gas Solution Engineer can customize any special gas Reciprocating Piston Compressor & high pure gas flammable gas oil-free Diaphragm Compressor, and Industry using Screw Air Compressor & Portable Piston Air Compressor.
 
A. The gas compression medium 
B. The flow rate: _____Nm3/hr
C. Inlet pressure: _____ Barg(gauge pressure)
D. Discharge pressure: _____ Barg(gauge pressure)
E. Inlet gas temperature & Outlet gas temperature
F. Cooling water temperature as well as other technical requirement.
G. Voltage/Frequency/Phase
The compressed medium may also include flammable and explosive gas, such as Natural Gas, Coal Gas ,coking gas, oxygen gas, Hydrogen gas, as well as special gas which are toxic gas and corrosive gas, radioactive gas. CZPT has taken a series of technical measures in aspects such as structure material, explosion prevention, auto-control and protection to guarantee safety and reliability.
The products are stable,reliable and have already been in series and modularized.keepwin can aslo rapidly provide products of other specifications through modular combination design upon users’ requirements.

Customer Case

 

             

FAQ

Q1: What’s your delivery time?
A: Generally screw compressor with 20-30 days, Reciprocating compressor & diaphragm high pressure gas comrpessor with 12-20weeks to customize producing.

Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.

Q3: How long could your air compressor be used?
A: Generally, more than 10 years.

Q4: Can you do OEM for us?
A: Yes, of course. We have around 2 decades OEM experience.And also we can do ODM for you.

Q5: What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.

Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air Gas Compressor. We are factory.

How to contact with us?
Send your Inquiry Details in the Below, or Click “Back to Home” to check more other Gas Compressor machine equipment!  

 

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China 7.5kw 10HP Combined Screw Air Compressor Assembled 1.2m3/Min Refrigerator Air Dryer  China 7.5kw 10HP Combined Screw Air Compressor Assembled 1.2m3/Min Refrigerator Air Dryer

Recent Posts